Hatsan valve pin type 2 Max Velocity BT65/Galatian/BullBoss

Product description

Hatsan valve pin type 2 Max Velocity is a full-power pin for PCP air rifles in Hatsan’s BT65, Galatian and BullBoss series. The valve pin lacks the power restriction used in Swedish 10 J versions and is intended for air rifles in licence-required full-power configuration.
The valve pin is part of the PCP system’s valve mechanism and affects how much compressed air is released when firing. This Max Velocity version is intended to enable the weapon’s higher muzzle energy and velocity in full-power configuration.

Fits the following Hatsan PCP air rifles

Hatsan valve pin type 2 fits the following model series:

• Hatsan BT65, including SB and RB variants
• Hatsan Galatian
• Hatsan Galatian Carbine
• Hatsan BullBoss

Check that the valve pin type and version are correct for your air rifle before ordering. Hatsan uses different valve pins depending on the model and valve design.

Muzzle velocity and muzzle energy in full-power configuration

Approximate maximum performance values for each air rifle model and calibre in full-power configuration are shown below.

BT65 4.5 mm:	Approx. 380 m/s – 40 J
BT65 5.5 mm:	Approx. 360 m/s – 61 J
BT65 6.35 mm:	Approx. 330 m/s – 71 J
Galatian 4.5 mm:	Approx. 360 m/s – 37 J
Galatian 5.5 mm:	Approx. 333 m/s – 53 J
Galatian 6.35 mm:	Approx. 303 m/s – 60 J
Galatian Carbine 4.5 mm:	Approx. 342 m/s – 33 J
Galatian Carbine 5.5 mm:	Approx. 318 m/s – 49 J
Galatian Carbine 6.35 mm:	Approx. 287 m/s – 54 J
BullBoss 4.5 mm:	Approx. 355 m/s – 36 J
BullBoss 5.5 mm:	Approx. 325 m/s – 51 J
BullBoss 6.35 mm:	Approx. 295 m/s – 57 J

The values refer to complete air rifles in full-power configuration and are not guaranteed performance values for the valve pin separately. Actual muzzle velocity and muzzle energy are affected by, among other factors, the weapon’s configuration, air pressure and ammunition weight.

Important information regarding licence requirements

This product is a separate spare part for the specified air weapon models. If a modification means that the air weapon is no longer power-restricted, a valid weapons licence is required for the modified weapon before the modification is carried out. It is the buyer’s responsibility to ensure that the necessary permits are in place and that applicable legislation is followed.
Applications for weapons licences are made through the Swedish Police Authority. Röda Stjärnan does not handle licence applications and does not offer assistance with them. We also do not provide instructions for power-increasing modifications to air weapons. For questions regarding permits and the application procedure, please contact the Swedish Police Authority.
We recommend that replacement of the valve pin and other internal work be carried out by a qualified gunsmith.

Give feedback on this product description