Product description
Full pressure Type 2 which fits Mod125-125TH-125 Sniper-135 -Torpedo 150-150TH-155.
Very popular to be used with Hatsan 125. NOTE that you do not need a license to buy the part, but it is with it mounted in a airgun the airgun may be subject to licensing (depending on local legislation) if the original piston is not full pressure.
The gas piston can be installed instead of the original spring on the guns above. You can also replace the 10J piston that is in the 125 Sniper Vortex to increase the muzzle velocity.
This piston is Hatsan's original piston that gives higher power than 10J and your airgun will be licensed with this piston installed when the impact energy exceeds 10J! Changing the piston is easy compared to changing the spring, but when the weapon becomes licensed it must only be carried out by a trained weapon technician.
The gas piston provides better shooting characteristics compared to a normal spring; a traditional spring
-Less vibrations and a power source that does not create twisting forces, this gives better precision in the weapon
-Quieter
-A more distinct feel and shorter time from firing to the bullet leaving the barrel (locking- time)
-Better effect. A gas spring has better life and keeps the output speed constant for a longer time.
-A gas spring can be kept tensioned for a longer time without losing power.
The pressure (and muzzle velocity) can be adjusted with compressed air through a PCP pump or diving tube (adapters not included). The piston will be delivered filled and ready to mount.
-Weight 284g
-Total length 339mm
-Outer diameter 19.56mm
-Max pressure 150 bar
-Stroke 129mm
Give feedback on this product description
Norge:
Hatsan Vortex fullhastighets gassstempel type 2
Sverige:
Hatsan Vortex Full Fart Gas Pistong Typ 2
