Hatsan Vortex gas spring type 1 full power

Product description

Hatsan Vortex type 1 is a full-power gas spring (Max Velocity) for, among others, the Hatsan 55, 60, 70, 75, 80, 85, 90 and SpeedFire air rifle models. This is the more powerful version of Hatsan's Vortex system, intended for full-power air rifles and not to be confused with the power-limited 10 J version.
The gas spring uses compressed air instead of a traditional coil spring and provides smoother power delivery with less vibration when firing.

Advantages of the Hatsan Vortex gas spring

The Vortex system is developed and manufactured by Hatsan for their own air rifles. Compared to a traditional coil spring, the gas spring offers several advantages:

• Less vibration: No coil spring that vibrates and twists when firing, providing a calmer shooting feel and potentially contributing to better accuracy.
• More consistent performance: More consistent power delivery between shots and less risk of muzzle velocity gradually deteriorating due to spring fatigue.
• Quieter mechanism: Reduced mechanical noise from the spring during cocking and firing.
• Shorter firing cycle: The gas spring's movement ends faster than that of a traditional coil spring, resulting in a more distinct shot.
• Longer service life: No coil spring that can weaken or break. The gas spring can also be kept cocked for longer without the same risk of spring fatigue.

The gas piston is supplied pre-filled with compressed air. The Vortex system uses standard compressed air and allows the gas pressure to be adjusted during servicing.

Fits the following Hatsan air rifles

Vortex type 1 is intended for the following models:

• Hatsan Mod 55
• Hatsan Mod 60
• Hatsan Mod 65
• Hatsan Mod 70
• Hatsan Mod 75
• Hatsan Mod 80
• Hatsan Mod 85
• Hatsan Mod 87
• Hatsan Mod 90
• Hatsan SpeedFire

Check that the gas spring type and version are correct for your air rifle before ordering. Hatsan also offers other versions of the Vortex system for different models.

Important information regarding licence requirements

This product is a separate spare part for the specified airgun models. If a modification means that the airgun is no longer power-limited, a valid firearms licence for the modified airgun is required before the modification is carried out. It is the buyer's responsibility to ensure that the necessary permits are in place and that applicable legislation is followed.
Applications for firearms licences are submitted to the Swedish Police Authority. Röda Stjärnan does not handle licence applications and does not offer assistance with them. We also do not provide instructions for power-increasing modifications of airguns. For questions regarding permits and the application process, please contact the Swedish Police Authority.
We recommend that replacement of the gas spring and other internal work be carried out by a qualified gunsmith.

Specifications

Manufacturer:	Hatsan
Series:	Vortex
Type:	1, full-power
Construction:	Gas spring with compressed air
Overall length:	286 mm
Outer diameter:	19.45 mm
Weight:	234 g
Maximum pressure:	135 bar

Note: The product image is for illustrative purposes and may differ from the actual appearance of the gas spring.

Give feedback on this product description