Hatsan Vortex Gas Spring Type 3 Full Power

Product description

Hatsan Vortex type 3 is a full-power gas spring (Max Velocity) for the Hatsan Striker 1000S, Striker 1000X, Striker Edge and AirTact air rifle models. This is the more powerful version of Hatsan's Vortex system, intended for full-power air rifles and not to be confused with the power-limited 10 J version.
The gas spring uses compressed air instead of a traditional coil spring and provides smoother power delivery with less vibration when firing.

Advantages of the Hatsan Vortex gas spring

The Vortex system is developed and manufactured by Hatsan for their own air rifles. Compared with a traditional coil spring, the gas spring offers several advantages:

• Less vibration: No coil spring that vibrates and twists when firing, providing a calmer shooting experience and potentially contributing to better accuracy.
• More consistent performance: More consistent power delivery between shots and less risk of muzzle velocity gradually decreasing due to spring fatigue.
• Quieter mechanism: Reduced mechanical noise from the spring during cocking and firing.
• Shorter firing cycle: The movement of the gas spring ends faster than that of a traditional coil spring, providing a more distinct shot release.
• Longer service life: No coil spring that can weaken or break. The gas spring can also remain cocked for longer without the same risk of spring fatigue.

The gas piston is supplied pre-filled with compressed air. The Vortex system uses standard compressed air and allows gas pressure adjustment during servicing.

Fits the following Hatsan air rifles

Vortex type 3 is intended for the following models:

• Hatsan Striker 1000S
• Hatsan Striker 1000X
• Hatsan Striker Edge
• Hatsan AirTact

Check that the gas spring type and version are correct for your air rifle before ordering. Hatsan also offers other versions of the Vortex system for different models.

Important information regarding licensing requirements

This product is a separate spare part for the specified air weapon models. If a modification means that the air weapon is no longer power-limited, a valid firearms licence for the modified weapon is required before the modification is carried out. It is the buyer's responsibility to ensure that the necessary permits are in place and that applicable legislation is followed.
Applications for firearms licences are made to the Swedish Police Authority. Röda Stjärnan does not handle licence applications and does not offer assistance with them. Nor do we provide instructions for power-increasing modifications to air weapons. For questions regarding permits and the application procedure, please contact the Swedish Police Authority.
We recommend that replacement of the gas spring and other internal work be carried out by a qualified gunsmith.

Specifications

Manufacturer:	Hatsan
Series:	Vortex
Type:	3, full-power
Construction:	Gas spring with compressed air
Overall length:	260 mm
Outer diameter:	19.52 mm
Weight:	245 g
Maximum pressure:	150 bar

Note: The product image is for illustrative purposes only and may differ from the actual appearance of the gas spring.

Give feedback on this product description