B6AC Charging station

Product description

Built-in mains adapter so that it can be connected directly to a wall outlet with the included cord, can also be powered via 12V (e.g. in the car, extra cord is required though).
A complete charging station for LiPo, Li-Ion, Ni-Mh, Ni-Cd, Pb and LiFe (a123).
Intelligent and the charging of batteries is controlled via a processor that ends charging when the battery is full and similar. Detects if the battery is connected incorrectly or similar.
If you buy our car connector for this charger, you can use it in the car by plugging it into the cigarette socket, very versatile.
Charging current 0.1-5A.
Discharge current 0.1-1A.
Can handle 1-6 cells Li-Ion, LiPo and LiFe. 1-15 cells Ni-Mh or Ni-CD. 2-20V lead accumulators.
Levereas complete with instruction manual and lots of different cables and connectors. Adapters are available for e.g. DEAN, small Tamiya and crocodile clips.

Note that this is not a genuine Imax, but an identical copy with the same function, these chargers are manufactured under many different names.

Give feedback on this product description