Madbull Ultimate Tight Bore 6.01 mm

Product description

High quality AEG inner barrel from Madbull. Specially treated inside for reduced friction and increased durability.

Prices vary for different lengths, see drop-down menu below.

A precision barrel with a smaller inner diameter than the standard barrels and the usual precision barrels. The tighter barrel prevents the bullet from wobbling against the edges of the barrel when it is fired, this gives a more stable bullet trajectory and increases accuracy. The smaller diameter of the precision barrel also prevents the air from being forced past the bullet, thus also increasing the muzzle velocity of the bullet.

A classic trim to improve your airsoft, easy to mount and gives a direct and clear result. A precision barrel increases muzzle velocity without increasing wear on internal parts.
This barrel from Madbull is manufactured with an inner diameter of 6.01 mm, the tightest on the market. This places quite high demands on the user.

The disadvantage of prec barrels is that the demands on the BBs and maintenance increase, you have to use BBs of higher quality, otherwise they can get stuck in the barrel. The requirements increase further when you use 6.01mm. You can also use Devil Blaster or other premium brand.

These 6.01mm are intended for experienced players only.

Always double check the length of your barrel to make sure you buy the right one. Slightly different manufacturers may have different lengths for each model. The model designation (M4, AK47, PSG1, etc.) is just an example.

Made from T6 7075 aluminum (the same alloy used in aircraft).

Give feedback on this product description