PPS Precision barrel 6.03mm Steel

Product description

High quality from PPS/SHS. Specially treated inside for reduced friction and increased durability.
Quick and easy change to increase the accuracy and muzzle velocity of your AEG.
Made of steel so it is heavier than most common and much harder, gives reduced wobble in the weapon.
Made of stainless steel. From the processing of the steel, there may be some oil left in the barrel, which in the worst case collects some particles. We recommend that you pull the barrel with a cleaning rod (piece of cloth, equivalent) before assembly. Sometimes weapons have slightly different measurements, e.g. 509mm instead of 510mm, 370 instead of 363 but in 99 cases out of a hundred it doesn't matter.

Prices vary for different lengths, see the drop down menu below.

A precision barrel with a slightly smaller inner diameter than the standard barrels. The tighter barrel prevents the bullet from wobbling against the edges of the barrel when it is fired, this gives a more stable bullet trajectory and increases accuracy. The smaller diameter of the precision barrel also prevents the air from being forced past the bullet, thus also increasing the muzzle velocity of the bullet.

A classic trim to improve your airsoft, easy to mount and gives a direct and clear result. A precision barrel increases muzzle velocity without increasing wear on internal parts.

Always double check the length of your barrel so you buy the right one. Slightly different manufacturers may have different lengths for each model. The model designation (M4, AK47, PSG1, etc.) is just an example.

This is an updated version from PPS, better material and smoother surface.

Give feedback on this product description