Amomax Polymer Holster G17 Clones

Product description

Amomax polymer holster that fits various clones of the G17. Among others:
ATP ACP, KWA ATP, APS ACP, ICS BLE-XAE, BW G17. This holster also fits sharp Glock 17.
So NOT the usual WE G17 e.g. Our article number 40476 is for e.g. WE G17. The BW G17 fits in both this holster and the 40476.

Made by CYTAC, their holster made for airsoft is called Amomax.

Versatile index finger safety that prevents the gun from falling out of the holster. At the same time, with a little practice, you can open the lock in the same movement as the pull and your pull goes as fast as without a lock.

Paddle for belt attachment included, attachment for MOLLE can be purchased separately.

Weight: approx. 110g
Material: Polymer

WE G17,G18 goes down if you do this "mod". However, it is easier to buy our article number 40476.
The handy person can bake and reshape the holster in the following way:

• Set the oven to 100 degrees with heat above and below
• Take electrical tape, and tape 2 layers along the entire slide and that the tape is also a little bit up on the slide. And this on both sides. It is so that the tape will "build out" a little more.
• When the oven has reached 100 degrees, just put the holster (you unscrew the belt attachment from the holster) on a sheet of baking paper in the middle of the oven for 10 minutes.
• After 10 minutes, remove the case with a potholder or oven mitt. Take the gun that now has electrical tape on the sheath and push the gun into the holster. It will be slow. Be sure to push the gun all the way into the holster.
• Now let the gun and holster rest and cool on their own until the holster is no longer hot. More than 30 minutes is best to avoid tension in the polymer material
• Remove the holster from the gun and remove the electrical tape. Try how "easy" it is. If it is still sluggish, repeat the above steps until it is fine. 1-2 rounds are usually enough. But certainly not more than 4.
This product can also be found on our other international sites:
Norge: Amomax polymerhylster G17 kloner Sverige: Amomax Polymerhölster G17 Kloner

Give feedback on this product description