Product description
This text has been translated with Google Translate.
Open up a whole new world of adventure with the DD Campervan tarp - a lightweight awning system designed to be used with your camper on those far-flung trips across counties, countries and continents.
Fits 6mm & 8mm beading channels
The DD Campervan Tarp has both 6mm & 8mm beading - whilst the tarp has been designed and tested round a VW California T6.1, it will fit any van / awning with a 6mm/8mm beading channel.
The tarp can be used as an overhead awning, threaded directly through the awning rail on the left-hand side of the van (8mm on the VW), or as a side-wall in conjunction with the built-in awning (6mm). Or for shelter on both sides, why not both!
Overhead: Once attached to the van, the outward edge of the tarp requires 2 x poles for support (if the tarp is used overhead), guyed out to provide stability. An optional third pole can be placed in the center of the tarp, to give more headroom and aid in water run-off on wet days*. The whole process takes only a few minutes, leaving you free to take in the views!
Side-wall: If used as a side-wall, simply thread the tarp into the channel on the edge of the awning, peg out the bottom, and attach the sides to the awning frame using the buckles.
UV50+ Protection
The DD Campervan Tarp is made from DD Hammocks UV50+ material.
As well as providing protection from bad weather thanks to its' 3000mm-rated waterproofing, it also blocks over 98% of harmful UV rays. An ideal solution for traveling in hot climates or lounging outside on long & bright sunny days
Weighing just over 1Kg and packing down far smaller than other dedicated awnings, you can easily fit this into your camper without taking up space for even more adventure gear!
Size 2.5mx 2.5m
Colour Olive Green
Weight 1120g (exc pegs)
Includes DD Campervan Tarp
Two beading sizes - 6mm & 8mm
Can be used as an overhead awning or a side-wall to pre-fitted awnings
Fully stormproof - 3,000mm-rated
UV50+ protective material
Includes adjustable buckles for attaching to awning frames
Supported with 2 Poles - 1 on each corner & 3rd central pole optional (sold separately)
Give feedback on this product description