Flashing Kit 45 degrees 45-85 mm

Product description

The bushing is made of steel and silicone that resists high temperatures. Temporarily withstand temperatures up to 300 degrees. The feedthrough is held in place with stainless steel fittings together with screws and nuts..
45 degree angle so that you don't have to have 45 degree angles on the pipe on many tent models. Keep in mind that the stove then ends up more directly under the penetration and in small tents this can mean that the stove comes too close to the outer fabric.

Note that the pipe can get significantly hotter than 300 degrees, therefore mount the bushing at such a distance from the stove that the temperature is not reached, alternatively use e.g. double-walled pipe or other spacer. The bushing becomes hard and brittle if it gets too hot, but will not melt or burn as long as the temperature is not extreme. The distance from the stove depends, among other things, on how hard you fire. The maximum temperature must not be exceeded. Mounting on the third pipe part is often suitable but depends on different circumstances. Insulated pipes may be needed if the pipe gets too hot.

Used to mount the stove in tents or huts, creates a watertight passage that reduces the risk of heat from the pipe spreading to adjacent materials. Only used together with non-heat-sensitive or combustible materials.

For pipe diameter 45-85 mm.
Dimensions base plate 312*220 mm.

Give feedback on this product description