Flashing Kit Straight 75-160 mm

Product description

Used to mount the stove in tents or huts, creates a watertight conduit that reduces the risk of heat from the pipe spreading to adjacent materials.
Note that tent conduits should always be used in conjunction with insulated pipes (e.g. double-walled), not lie directly against a pipe. Otherwise, the pipet will be too hot for the silicone grommet. Some do not use insulated pipes, but then the passage must be placed far enough from the stove so that the temperature of the pipe is not too high.

Maximum temperature 300℃. Too intense burning or mounting too close to the stove can cause high temperatures on the spout, make sure the maximum temperature is never exceeded.

Made of silicone, aluminum and stainless steel.
For spout 75-160 mm.
Outer diameter mounting ring: 240 mm.
Inner diameter mounting ring: 220 mm.

Note that the pipe can get significantly hotter than 300 degrees, therefore mount the grommet at such a distance from the stove that the temperature is not reached. The bushing becomes hard and brittle if it gets too hot, but will not melt or burn as long as the temperature is not extreme. The distance from the stove depends, among other things, on how hard you fire. The maximum temperature must not be exceeded. Mounting on the third pipe section is often suitable but depends on different circumstances.

Give feedback on this product description