Winnerwell Flashing Kit

Product description

Used together with Winnerwell's double-wall smoke pipe or similar
The grommet is made of steel and silicone that resists high temperatures. The grommet is held in place by stainless steel fittings with six wing nuts.
Used to mount the stove in tents or cabins, creates a watertight grommet that reduces the risk of heat from the pipe spreading to adjacent materials.
Please note that you Do NOT connect this directly to a pipe, you need a double or similar.
Fits both 2.5 inch and 3.5 inch double sided pipe pipes, as well as 2.1 inch and 2.5 inch triple wall.

Inner diameter 122mm 4.8 inches.
Outer diameter 220mm 8.7 inches.
Withstands temperatures up to 240℃.For intensive burning or mounting too close to the stove may cause high temperatures on the pipe, make sure that the maximum temperature is never exceeded.

This flashing kit must be installed under the fifth row of holes on the Heat Protector Chimney. If necessary, buy short pipes to ensure that the flashing kit does not end up higher on the triple-walled pipe. The upper ventilation holes of the triple-walled pipe get very hot, the silicone must not come into contact with the top five rows.

Give feedback on this product description