Winnerwell Pipe adapter 2.1 to 2.5

Product description

Winnerwell Pipe Adapter 2.1" to 2.5" is used so that you can use 2.5" accessories for your Small 2.1" stove. For example, if you want to mount a 2.5" pipe oven on your Small stove.
Two parts included; first an adapter that takes the pipe from 2.1 to 2.5 and then one that you mount after e.g. the pipe stove down to 2.1" again so that the rest of the pipe parts can be mounted. Of course, it is also possible to switch to 2.5" completely as well without tapering, but keep in mind that the draft and combustion in the stove may be affected.
The product is not intended to reduce the pipe pipe on 2.5 inch stoves as a too narrow pipe can cause poor functioning of the stove and reduced draft with the risk of smoking protrudes from the stove itself or that it simply does not work as it should.
Note that with increased diameter and weight of smoke pipes and accessories, it is especially important that you fasten the narrow stove with proper tent pegs in the legs to the ground so that it does not risk to tip.

Material: AISI304 stainless steel
Weight: 0.25kg / 0.55lbs

Give feedback on this product description