Leapers Double 25mm Extended 9-11mm Rail Scope Mount

Product description

High one-piece scope mount for scopes with a 25.4 mm tube (1") and air rifles with a 9–11 mm dovetail rail. The mount has a reversible clamp plate that allows it to fit various widths of air rifle rails within this range.
The 38 mm long offset can be set forward or backward. This lets you move the scope to provide better eye relief when the length of the rail or the straight tube section of the scope limits placement.

High profile and stop screw for air rifles

The mount has a 34 mm center height and a saddle height of 21.3 mm, measured from the top of the rail to the scope tube. There is space for an objective lens with up to 67 mm outer diameter, but the actual clearance also depends on the weapon’s barrel, receiver, and rail placement.
The mount is secured to the rail with allen screws and features a stop screw that can be used if the rail has a corresponding stop hole. This prevents the mount from shifting during shooting and is especially useful on spring-powered air rifles. The mount is precision machined from aluminum with a black, matte anodized finish.

Dimensions and specifications

Tube diameter:	25.4 mm (1 inch)
Mount for rail:	9–11 mm dovetail
Profile:	High
Offset:	38 mm
Center height:	34 mm
Saddle height:	21.3 mm
Overall length:	100 mm
Base length:	62 mm
Minimum free rail length:	62 mm
Width:	41 mm
Ring width:	18 mm per ring
Distance between rings:	39 mm internal
Outer dimension of rings:	75 mm edge to edge
Maximum objective outer diameter:	67 mm
Locking mechanism:	Allen screws and stop screw
Tightening torque, M4 side plate:	35 in-lb (approx. 4.0 Nm)
Tightening torque, M3 ring screws:	15 in-lb (approx. 1.7 Nm)
Material:	Aluminum
Finish:	Black matte anodizing
Weight:	125 g
Included:	Allen keys 2.5 mm, 3 mm and 4 mm

Give feedback on this product description