Leapers UTG Max Strength scope rings 25.4 mm high for Picatinny and Weaver

Product description

Leapers UTG Max Strength are high scope rings for 25.4 mm tube diameter (1 inch) and mounting on Picatinny or Weaver rails. With 25 mm wide rings and six screws per ring, the scope gets a wide contact surface and even clamping around the tube. The high profile provides extra clearance for the objective lens, while protective inserts on the inside help protect the tube’s surface finish. Supplied as a pair.

Wide rings with protective interior

The rings are made from aluminum alloy and have a synthetic protective insert on the inside that helps protect the scope’s surface finish. The six screws per ring, three on each side, distribute the clamping pressure over the wide contact area.

Twist Lock mount for Picatinny and Weaver

The mounts lock onto the rail with a Twist Lock screw knob. A transverse recoil lug engages with the rail slots and prevents the rings from shifting lengthwise. The rings fit Picatinny and Weaver rails, about 20–21 mm wide, and are not intended for 9–11 mm dovetail rails.

High profile with 32.7 mm center height

The distance from the top of the rail to the underside of the scope tube is 20 mm. This corresponds to a center height of 32.7 mm, measured from the top of the rail to the center of the tube. The height is important when you need extra clearance for a larger objective lens. Also check the outer diameter of the objective housing and the space towards the barrel or receiver when choosing mounts.

Specifications

Brand:	Leapers UTG
Model:	RG2W1206
Tube diameter:	25.4 mm / 1 inch
Rail:	Picatinny and Weaver, about 20–21 mm
Profile:	High
Height to bottom of tube:	20 mm
Center height:	32.7 mm
Ring width:	25 mm
Screws per ring:	6
Mounting:	Twist Lock screw knob with recoil lug
Material:	Aluminum alloy
Quantity:	2 rings

Give feedback on this product description