Product description
This text has been translated with Google Translate.
A special type of sight base that is made to attach RMR type sights to a Glock.
The mount is made for sharp Glock 17, Glock 19 and similar pistols.
Made of strong aluminum alloy.
What is important is that the rear sight mounts in a trapezoidal cutout.
We have also tested this sight base on the VFC/Umarex Glock 17 and 19 as well as the B&W G17 and KWC G17, they fit perfectly. However, you need to cut or replace the screw that holds the nozzle housing in place, as it normally goes up into the rear sight.
Does not fit WE or KJW G17.
Installation:
1) Remove the rear sight through to move it to the side (may need to loosen a screw underneath, take off the slide and you can see the screw).
2) Remove the locking lug from the sight base, insert the locking lug where the rear sight was.
3) Put on the sight base (the 4 prongs should be pointing up) and screw the sight base.
Attach your RMR type sight with the 2 screws provided. ATTENTION! Check that the screws fit your sight and cannot be screwed down so deep that they damage the slide.
Some sights have the screw holes at different distances from each other, check that they match the distance of the sight base of 1.5cm.
Give feedback on this product description
Norge:
Siktebase for Glock
Sverige:
Siktesbas för G17 G19