Product description
Top quality battery with high current capacity, 20C continuous and 40C burst.
With the high current discharge capacity, maximum current is delivered to the motor and provides fast response and maximum power.
Extended warranty see below
Quality copper cables with silicone as per 16 AWG standard.
Dimensions approx. 16*20*125 mm.
Small Tamiya connector.
Fits most M4 Buffer Tubes. However, check the inner length of your buffer tube, there are different buffer tubes and some are not deep enough for you to be able to have a battery and be able to push it the stock into the innermost part.
Extended warranty!
2 year hassle-free warranty. TOR airsoft batteries should be the safe choice of continuous power. If the battery doesn't work you'll get a new one. Contact us at webb@rodastjarnan.com
The warranty is valid for a full 2 years from the time of purchase.
With TOR airsoft batteries, you can feel confident that you will get good power for a long time to come.
Warning text about increased wear
If you go from a standard battery of 8.4V (NiMh) or 7 .4V (LiPo) to an 11.1V LiPo and your gun will fire much faster, even up to twice as fast in some applications. This causes much higher wear and tear on the internal parts of the weapon, and you should be aware of this. Only use 11.1V LiPo if you know that your particular weapon can withstand the extra load, or are willing to take that risk. Keep in mind that you can use up your guns warranty when switching to 11.1V LiPo.
Give feedback on this product description
Norge:
TOR LiPo 11,1V 1300 mAh 20/40C stangbufferrør
Sverige:
TOR LiPo 11.1V 1300 mAh 20/40C Stav Buffer Tube
