Tent penetration 45 degrees Flashing Kit

Product description

The flashing kit is made of steel and silicone that resists high temperatures. Temporarily withstand temperatures up to 300 degrees. The grommet is held in place with stainless steel fittings with six screws/nuts.
45 degree angle so that you don't have to have 45 degree angles on the smoke pipe on many tent models. Keep in mind that the stove will then end up more directly under the exit and in small tents this may mean that the stove comes too close to the outer fabric.

Please note that smoke pipes can get significantly hotter than 300 degrees, therefore mount the feed-through at such a distance from the stove that the temperature is not reached, alternatively use e.g. double-walled smoke pipe or other spacer. The flashing becomes hard and brittle if it gets too hot, but will not melt or burn as long as the temperature is not extreme. The distance from the stove depends, among other things, on how hard you fire. The maximum temperature must not be exceeded. Mounting on the third pipe section is often suitable but depends on different circumstances.

Used to mount the stove in tents or huts, creates a watertight passage that reduces the risk of heat from the pipe spreading to adjacent materials. Only used together with non-heat-sensitive or combustible materials.

For pipe diameter approx. 6-7.5 cm.
Dimensions approx. 235*90 mm.
Weight approx. 1000 grams.
Fits e.g. ex. Surtr, Suttung and Skrymer

Give feedback on this product description