Surtr Tent Flashing Kit

Product description

The flange is made of steel and silicone that withstand high temperatures. Withstands temperatures up to 200 degrees. The flange is held in place with stainless steel fittings and six screws/nuts.

Please note that stove pipes can become significantly hotter than 200 degrees, so install the flange at a sufficient distance from the stove to prevent this temperature from being reached, or use, for example, a double-wall stove pipe or another spacer. The flange becomes hard and brittle if it gets too hot, but will not start to melt or burn unless the temperature is extreme.

Used for installing a stove in tents or shelters, creating a watertight pass-through that reduces the risk of heat from the pipe spreading to adjacent materials. Use only with materials that are not heat-sensitive or flammable.
Fits Surtr, Suttung and Skrymer, among others.

For pipe diameter approx. 6–7.5 cm.
Dimensions approx. 235*90 mm.
Weight approx. 1000 grams.

Give feedback on this product description