With this BeaverCraft Chisels Set SC03 you will start from primary forming of the surface, will make deep scratches and shaping, remove greater or lesser amounts of wood, rough out the background for a large relief panel, make the ridges and hollows, make relief carvings and also fine lines, and detail carving. The compact chisels are well-sharpened and buffed for immediate use with the edges that will stay sharpfor many enjoyable hours of woodcarving. You can use such tools for both softwood and hardwood treatment. Handles are made of Ash and oil impregnated.

The tools are used for precise manual treatment only, excluding hammer and mallet use. These delicately balanced chisels work well for getting into all confined areas. The shorter blades and more compact comfortable handles will work well for your best carving projects. The tools come in a 12-pocket tool roll for storage, transport, and protection of the edges. Includes a leather strop and a bar of green-gray polishing compound to make the tools razor sharp again when needed.

Once you start using these great tools on your woodcarving journey, you’ll just want more – more wood and more successful carving projects. BeaverCraft chisels are handcrafted both for beginners and professional wood carvers.

The set BeaverCraft SC03 includes:

Compact straight flat chisel single bevel K1/10
Compact straight rounded chisel K5/12
Compact long bent gouge K6L/15
Compact straight rounded chisel K8/08
Compact straight rounded chisel K9/10
Compact short bent gouge K8a/14
Compact straight V-profile chisel K12/02
12 Pocket Tool Roll TR12
Leather strop & green-grey polishing compound

Dimensions:

K1/10 - Compact straight flat chisel single bevel. Sweep №1

Blade width – 10 mm (0.40 inches)
Total length – 192 mm (7.56 inches)
Blade length – 80 mm (3.15 inches)
Handle length – 115 mm (4.53 inches)

K5/12 – Compact straight rounded chisel. Sweep №5

Blade width – 12 mm (0.47 inches)
Total length – 192 mm (7.56 inches)
Blade length – 80 mm (3.15 inches)
Handle length – 115 mm (4.53 inches)

K6L/15 - Compact Short Bent Gouge

Blade width – 15 mm (0.59 inches)
Total length – 192 mm (7.56 inches)
Blade length – 80 mm (3.15 inches)
Handle length – 115 mm (4.53 inches)

K8/08 – Compact straight rounded chisel. Sweep №8

Blade width – 8 mm (0.31 inches)
Total length – 192 mm (7.56 inches)
Blade length – 80 mm (3.15 inches)
Handle length – 115 mm (4.53 inches)

K9/10 - Compact straight rounded chisel. Sweep №9

Blade width – 10 mm (0.39 inches)
Total length – 192 mm (7.56 inches)
Blade length – 80 mm (3.15 inches)
Handle length – 115 mm (4.53 inches)

K8a/14 - Compact short bent gouge. Sweep №8

Blade width – 14 mm (0.55 inches)
Total length – 192 mm (7.56 inches)
Blade length – 80 mm (3.15 inches)
Handle length – 115 mm (4.53 inches)

K12/02 - Compact straight V-profile chisel. Sweep №12

Blade width – 2 mm (0.08 inches)
Blade angle – 60°
Total length – 192 mm (7.56 inches)
Blade length – 80 mm (3.15 inches)
Handle length – 115 mm (4.53 inches)

This product can also be found on our other international sites: